A4-11   Adhesive, 11OZ

Smooth-On Metalset two-part epoxy adhesive has excellent adhesion properties,

which makes it ideal for industrial bonding applications to apply on both porous

and non-porous surfaces. It can be easily applied even on vertical surfaces without sagging

or losing adhesion. This adhesive comes in two parts A and B. The mild odored part-A

has a flash point greater than 300 degrees F, viscosity of 1000 to 2000 cP and a specific

gravity of 1.07. The mild ammonia odored part-B has a flash point greater than 485 degrees F,

viscosity of 320,000 cP and a specific gravity of 1.4. This adhesive is supplied in an 11-ounce

tube and can be mixed in a 1:1 ratio by volume or weight to form a metallic color mixture.

Features:

Adhesive with good machining qualities, offers excellent resistance to alkalis, dilute acids and solvents

Contains aerodynamic smoothing compound

Specific volume of 19.5 cubic inches per pound

Tensile strength of 3600 psi and compressive strength of 7500 psi

Tensile modulus of 165000 psi and compressive modulus of 160000 psi

1.2% elongation at break

Sag resistance of 1/4 inch

Benefits:

Ideal for stopping leaks in pipes/valves/tanks, bonding like/unlike surfaces, filling metal joints/dents and anchoring bolts in wood, concrete, or repairing metal surfaces

Great for setting abrasion-resistant tile in conveyors and pulverizing equipment

Serves as shim material between uneven surfaces

Suitable for use as auto or truck body solder

Use for making jigs and fixtures

Applications:

Stopping leaks in pipes, valves and tanks (car gas tanks)

Bonding like and unlike surfaces

Filling metal joints, dents, anchoring bolts in wood, concrete and repairing metal surfaces

Specifications:

Bell Spec 299-947-099 Rev. D Certified

OSHA Hazard Certified